Lighting a stove is easiest with the top-down method: a firelighter on the grate, softwood kindling stacked jenga-style above it for airflow, and small logs resting against the stack. Follow these four steps every time for a fast, low-smoke light.
By Leo, Chimney Tech installer with 20+ years experience.
How to light your stove
- Place a natural firelighter on the grate or fire bed. Start stacking softwood kindling jenga style 3 or 4 rows high. This method ensures sufficient airflow between each piece of kindling.
- Gently rest one or two small kiln dried logs up against the kindling stack. Compressed oak briquettes are an excellent addition or even substitute to logs at this stage.
- Make sure all the air vents are fully open before setting the firelighter alight, leave the stove door ajar slightly to enhance the airflow and speed up the lighting process.
- Now light your firelighter. Once the fire is burning vigorously you can close the door fully and add logs as you need them.
TIP: Warm fuel ignites easier! Always bring your fuel inside to keep warm before burning.
Lighting your stove FAQs
Should I leave the stove door open when lighting?
Leave it slightly ajar, not wide open. A small gap boosts airflow and helps the kindling catch quickly. Once the fire is burning vigorously, close the door fully and control the burn with the air vents.
Why won’t my kindling stay lit?
The usual causes are damp fuel, too little airflow between the pieces, or a cold chimney blocking the draft. Use kiln-dried kindling, stack it loosely jenga-style, open all vents, and prime the flue if the chimney is cold.
Can I use newspaper instead of a firelighter?
Yes, screwed-up newspaper or very dry wood shavings work for lighting. Avoid glossy or coloured paper, and never use accelerants such as petrol or firelighting gel poured onto the fuel.
About the author: Leo is a Chimney Tech installer with 20+ years of experience fitting stoves, lining chimneys and sweeping flues across Dublin, Kildare, Meath, Cavan and Wicklow.